Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

15.06.2025 13:04

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

but this device (an Inductor) … impedes the rapid changes in the current.

For this case there are devices called Metal oxide varistors (MOV).

A fuse is a non-resetable over current circuit protector.

What is a fun psychological trick to try on someone?

Can the fuse protect the electronic devices from lightning instead of a surge protector.

A circuit breaker is similar, but is resettable.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

When was the first time you suck on a penis?

(Dc diagram shown, AC is similar).

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

One is “what exactly is in a ‘surge protector’ ? ”

What should I do? I'm 17 and I'm dating a 23-year-old guy.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

Because the load is inductive, the current lags the voltage.(by a bit).

I see ugly guys dating gorgeous, "hot" women all the time. I, too, am not very attractive but I'm not doing well with the ladies. What's their secret?

It also is a device that limits the change in current flow.

There are three different concepts here that are getting confused.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

How exactly do things get smuggled into prison? Does the sender hide it inside something else very well? Does someone put it in their butt? Do the prisoners make deals with the officers?

What does a fuse do?

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

California schools are very liberal. Do you think California schools are teaching students to hate Republican views (views on: God, guns, prayer, secure borders, etc.)?

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

It seems Mohan does not understand the difference between a comment and an Answer.

The third is lightning and “how it gets conducted into a home.”

What do men like to be given for their birthday?

These devices are installed between the “hot” and “neutral” and protective ground.

This is 'the assistant's answer'

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

How could Trump, with his deplorable garbage supporters, manage to win an election?

But… the neutral is now “floating” because of the 1 ohm resistance.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

He then asserts :

Who are your 5 or so favorite Quora people?

[old diagram got deleted by accident]

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

I post the exact comment here.

What are women's true thoughts and feelings on bestiality?

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

Barnstars:

but I think this circuit , shows a few more pieces.

How would you feel if your girlfriend had dick pics on her phone?

At least they know the answer if they wanted it.

2024–10–10[John johnson John Johnson ]

First Sentence:

Can anyone or anything overthrow your belief in the Jewish God?

The bolt then partially travels down the line to your home.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

This device then solves the entire problem.

Google, Meta and Snap think this tech is the next big thing - CNN

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

2024–10–14 [Omar Gharbi Omar Gharbi ]

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

What factors may contribute to intelligent individuals identifying as Republican rather than Democrat in the United States today?

Now when you have a certain ac resistance, then a current flows in a loop.

But it can get overloaded, and no longer works.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

Kelley Wolf hospitalized by officers 'against my will' days after revealing divorce - USA Today

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

The other is “what does a “fuse” do?”

Edit 2024–10.

This is where the MOV conducts again, and dissipated the energy.

In schematic diagrams this is the symbol for a fuse:

These are simplified answers to the original question, and does not change anything I wrote above.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

So, the voltage could go up to 500 volts, and the fuse will not open up.

An AC voltage/ current source, and an ac inductive load.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

He then describes the function of a fuse.

nine

what exactly is a ‘surge’ protector?

2024–10–16 [ OO OLAOYE OYEBODE ]

This one hit behind the barn.

He then describes Rainy Season and Lightning.

There are two important concepts here.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

eight

so, what happens?

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

This is where this question deviates from being a 'generic' question, and becomes more specific.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

a photo is worth a thousand words.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

the problem then depends on "how fast does the fuse operate?".

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

Upvotes:

[image of Common-mode choke]

What is lightning?

One

Here is a simplified AC power diagram.

The MOV will conduct when the voltage exceeds 50% of line voltage.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

At one ohm, the resistor has a maximum of 1 watt power.